YOKOGAWA ASI133-H0Q缩略图

YOKOGAWA ASI133-H0Q

Yokogawa ASI133-H0Q Product Detailed Introduction

Product Overview

Yokogawa ASI133-H0Q is a high-performance analog input module,mainly used to convert analog signals into digital signals to provide input data for programmable logic controllers(PLCs)or other control systems.It is suitable for a variety of industrial applications that require analog signals to be integrated into the control system.

Product Specifications

Model:ASI133-H0Q

Number of channels:8

Input type:voltage or current

Input range:-10 V to+10 V or 4 mA to 20 mA

Resolution:16 bits

Sampling rate:1000 Hz

Operating temperature:-20°C to 70°C

YOKOGAWA ASI133-H0Q插图 YOKOGAWA ASI133-H0Q插图1 YOKOGAWA ASI133-H0Q插图2

Protection level:IP20

Product Features

High precision:High-precision A/D converter is used to provide high-precision measurement results.

High reliability:Industrial-grade components and design are used to operate reliably in harsh environments.

Easy to use:Easy-to-understand configuration software and clear wiring identification are provided to facilitate user configuration and use.

Application areas

Industrial process control:used for various industrial process control,such as temperature,pressure,flow,etc.

Test and measurement:used for data acquisition and analysis.

Machine vision:used for image processing and analysis.

YOKOGAWA PW441-10缩略图

YOKOGAWA PW441-10

Yokogawa PW441-10 Product Details

Product Overview

Yokogawa PW441-10 is a power supply module designed for Yokogawa V-net network.It is mainly used to provide stable power supply for devices in V-net network to ensure the normal operation of the network.PW441-10 is usually installed in V-net routers or other network devices.

Main Functions

Power Supply:Provides stable power supply for V-net network devices.

Overcurrent Protection:With overcurrent protection function to prevent equipment damage.

Overvoltage Protection:With overvoltage protection function to ensure equipment safety.

Modular Design:Modular design for easy installation and maintenance.

YOKOGAWA PW441-10插图 YOKOGAWA PW441-10插图1 YOKOGAWA PW441-10插图2

Product Features

High Reliability:Adopts industrial-grade components to ensure stable operation in harsh environments.

Strong Compatibility:Compatible with Yokogawa V-net network devices.

Easy Installation:Modular design,easy installation.

Application Fields

Industrial Automation:Used in Yokogawa V-net network to provide power for various automation equipment.

Process control:Used in Yokogawa V-net network to provide power for process control equipment.

Technical parameters(partial)

Parameter Value Unit

Input voltage 100-120VAC V

Output current 1.4A A

leybold PTR225缩略图

leybold PTR225

Leybold PTR225 Product Detailed Analysis

Product Overview

Leybold PTR225 is a high-precision vacuum measuring instrument,which belongs to the Penning vacuum gauge.It is widely used in various occasions that require high-precision vacuum measurement,such as semiconductor manufacturing,scientific research experiments,vacuum coating,etc.PTR225 is known for its reliability,stability and wide measurement range.

Product Features

High-precision measurement:PTR225 can provide high-precision vacuum measurement and is suitable for occasions with high vacuum requirements.

Wide measurement range:It can measure a wide range of vacuum from 10^-9 mbar to 10^-2 mbar.

Good stability:It has good long-term stability and can maintain measurement accuracy for a long time.

Compact structure:The design is compact and easy to install.

High reliability:It uses high-quality materials and processes and has high reliability.

leybold PTR225插图 leybold PTR225插图1 leybold PTR225插图2

Working principle

The working principle of the Penning vacuum gauge is based on the movement of electrons in a magnetic field.When gas molecules enter the vacuum chamber,electrons collide with gas molecules to produce ions.These ions are accelerated under the action of the electric field and hit the cathode to produce secondary electrons.By measuring the generated ion current,the gas pressure in the vacuum chamber can be calculated.

Main applications

Semiconductor manufacturing:used for vacuum measurement in processes such as vacuum coating and ion implantation.

Scientific research experiments:used for various vacuum experiments,such as material science and physics.

Vacuum coating:used to control the vacuum degree during the coating process.

Vacuum pump system:used to monitor the vacuum degree of the vacuum pump system.

Technical parameters(typical values,please refer to the product manual for specific parameters)

Measuring range:10^-9 mbar to 10^-2 mbar

Accuracy:±2%

Response time:fast response

Output signal:analog signal or digital signal

ABB LDGRB-01 3BSE013177R1缩略图

ABB LDGRB-01 3BSE013177R1

ABB LDGRB-01 3BSE013177R1A Product Detailed Analysis

Product Overview

ABB LDGRB-01 3BSE013177R1A is an I/O module in an industrial automation control system produced by ABB.This type of module is usually used to connect external devices,such as sensors,actuators,etc.,to achieve real-time monitoring and control of the production process.The LDGRB-01 series modules are known for their reliability,flexibility and scalability,and are widely used in various industrial automation scenarios.

Product Features

High-performance processor:The LDGRB-01 module is usually equipped with a high-performance processor that can quickly process large amounts of data and achieve real-time control.

Large-capacity storage:The module has a large storage space and can store programs,data,etc.

Flexible configuration:It supports a variety of I/O types,including digital input/output,analog input/output,etc.,and can be flexibly configured according to different application requirements.

High reliability:It adopts industrial-grade design with high reliability and stability.

Strong scalability:It can be integrated with various automation systems of ABB to achieve system expansion.

ABB LDGRB-01 3BSE013177R1插图 ABB LDGRB-01 3BSE013177R1插图1 ABB LDGRB-01 3BSE013177R1插图2

Main functions

Signal acquisition:Collect various signals from field equipment,such as switch quantity,analog quantity,etc.

Signal output:Output control signals to field equipment to control the equipment.

Data processing:Process the collected data and perform corresponding control actions according to the control program.

Communication:Communicate with other devices to achieve data exchange.

LAETUS LLS570-05缩略图

LAETUS LLS570-05

LAETUS LLS570-05 Product Detailed Analysis

Product Overview

LAETUS LLS570-05 is an industrial-grade barcode laser scanner,mainly used for barcode reading on industrial production lines.It is known for its high reliability,high reading speed and ability to adapt to harsh environments.

Product Features

High-density barcode reading:Able to read high-density barcodes,suitable for various industrial scenarios.

Long-distance reading:The maximum reading distance can reach 110mm,adapting to different production line layouts.

Strong durability:The design is rugged and durable,and can adapt to harsh industrial environments.

High scanning speed:Read barcodes quickly and accurately to improve production efficiency.

Flexible configuration:Supports multiple interfaces and protocols,which is easy to integrate into different systems.

LAETUS LLS570-05插图 LAETUS LLS570-05插图1 LAETUS LLS570-05插图2

Main functions

Barcode reading:Read one-dimensional and two-dimensional barcodes at high speed and accurately.

Data output:Output the read barcode data to the host computer or other devices.

Interface connection:Supports multiple interfaces,such as RS232,USB,etc.

Technical parameters(typical values,please refer to the product manual for specific parameters)

Reading distance:Maximum 110mm

Interface type:RS232,USB

Scanning speed:High speed

Operating temperature:-10℃~50℃

KUKA VT82C586B缩略图

KUKA VT82C586B

KUKA VT82C586B Product Detailed Analysis

Product Overview

KUKA VT82C586B is an older chip,usually used in early KUKA robot controllers.It is a chipset produced by VIA Technologies,which is mainly responsible for the core operation and data processing of the controller.

Product Features(Based on the general chipset characteristics)

Obsolete product:VT82C586B belongs to an earlier chipset and is no longer mainstream.

Core functions:As the main chip of the controller,it is responsible for processing instructions,controlling I/O,managing memory and other core functions.

Customization:Considering the special needs of KUKA robot controllers,this chipset may have been customized by KUKA.

Restrictions:Because it is an old product,there may be limitations in performance,scalability,etc.

KUKA VT82C586B插图 KUKA VT82C586B插图1 KUKA VT82C586B插图2

Application scenarios

Old KUKA robot controller:Mainly used in KUKA robots equipped with KRC1 or early KRC2 series controllers.

Spare parts market:It may be needed in the repair or upgrade of some old robots.

KUKA SBM2缩略图

KUKA SBM2

KUKA SBM2 Product Detailed Analysis

Product Overview

KUKA SBM2 is a single-axis brake module designed by KUKA Robotics for its KRC2 series controller.It is mainly used to control the brakes on each joint of the robot to ensure that the robot can stop safely when not in operation and prevent accidental movement.The SBM2 module cooperates with the KRC2 controller to achieve precise control of the brake,thereby improving the safety and reliability of the robot.

Product Features

Single-axis control:Designed for controlling the brake of a single joint.

Precise control:Control the brake through the servo bus to achieve precise braking control.

Safe and reliable:Provide open circuit and short circuit monitoring functions to ensure the reliability of the braking system.

Easy to install:Compact design and simple installation.

KUKA SBM2插图 KUKA SBM2插图1 KUKA SBM2插图2

Main functions

Brake control:Control the opening and closing of the brake.

Fault monitoring:Monitor whether there is a fault in the braking system.

Signal feedback:Feedback the status information of the brake to the controller.

Technical parameters(typical values,please refer to the product manual for specific parameters)

Applicable controller:KRC2 series controller

Control mode:Servo bus control

Monitoring function:Open circuit and short circuit monitoring

KUKA RDW2缩略图

KUKA RDW2

KUKA RDW2 product detailed analysis

KUKA RDW2 is an industrial robot controller board produced by KUKA Robotics Corporation.As the core component of the robot system,it is responsible for handling key functions such as robot motion control,program execution,and I/O management.The RDW2 controller is widely used in various industrial automation fields with its high performance,reliability,and flexible scalability.

Product Features

High performance:It adopts advanced processors and control algorithms to achieve high-precision motion control and fast response.

Reliability:After rigorous testing and verification,it has high reliability and can operate stably in harsh industrial environments.

Scalability:It supports multiple I/O interfaces and communication protocols,and can be flexibly expanded to meet different application requirements.

Openness:It provides an open software platform to facilitate users to carry out secondary development and customization.

KUKA RDW2插图 KUKA RDW2插图1 KUKA RDW2插图2

Main functions

Motion control:Control the movement of each joint of the robot to achieve complex motion trajectories.

Program execution:Execute the robot program written by the user to realize automation tasks.

I/O management:Manage the input and output signals of the robot to achieve communication with external devices.

Fault diagnosis:Monitor the operating status of the robot,detect and handle faults in a timely manner.

Application scenarios

Industrial automation:Widely used in automobile manufacturing,electronic manufacturing,logistics and other fields,for automation tasks such as welding,handling,and assembly.

Scientific research and education:Used for robot teaching and scientific research experiments.

EMERSON VE4009缩略图

EMERSON VE4009

Emerson VE4009 Product Detailed Analysis

Product Overview

Emerson VE4009 is a key module in the Emerson DeltaV system,commonly known as the actuator sensor interface card.It is mainly used to connect various actuators and sensors to achieve real-time monitoring and control of process variables.The VE4009 module can adapt to different field devices and control requirements through flexible configuration,thereby improving the overall performance and reliability of the system.

Product Features

Versatility:Supports multiple types of actuators and sensors,including valve positioners,transmitters,etc.

Flexible Configuration:Can be flexibly configured through the DeltaV system software to adapt to different field devices and control requirements.

High Reliability:Adopts industrial-grade design with good anti-interference and stability.

Easy to maintain:Modular design for easy maintenance and replacement.

EMERSON VE4009插图 EMERSON VE4009插图1 EMERSON VE4009插图2

Main Functions

Signal Conversion:Convert analog signals and digital signals to achieve communication between actuators and sensors and control systems.

Signal Isolation:Provide electrical isolation to protect the control system from interference from field devices.

Fault Diagnosis:With self-diagnosis function,it can detect faults in modules and connected devices.

YOKOGAWA ASI133-H0Q缩略图

YOKOGAWA ASI133-H0Q

Yokogawa ASI133-H0Q Product Detailed Analysis

Product Overview

Yokogawa ASI133-H0Q is an analog input module produced by Yokogawa Electric,mainly used in its CENTUM VP and other distributed control systems.The module can convert external 4-20mA analog signals(such as from pressure sensors,temperature sensors,etc.)into digital signals for PLC processing and control.

Product Features

High Precision:Provides high-precision analog signal conversion to ensure the accuracy of measurement data.

Isolation Design:Each channel has isolation protection,which improves the reliability and safety of the system.

Flexible Configuration:Input range,filtering and other parameters can be configured through software to meet different application requirements.

Easy to Install:Modular design,simple and convenient installation.

.YOKOGAWA ASI133-H0Q插图 YOKOGAWA ASI133-H0Q插图1 YOKOGAWA ASI133-H0Q插图2

Main Functions

Analog Signal Acquisition:Collect external 4-20mA analog signals.

Signal Conversion:Convert analog signals into digital signals.

Isolation Protection:Provide isolation between channels to prevent interference.

Technical parameters(typical values,please refer to the product manual for specific parameters)

Number of input channels:8 channels

Input signal:4-20mA

Resolution:16 bits

Sampling rate:configurable

Isolation voltage:500Vrms

Back to Top

Search For Products

Product has been added to your cart